Category: Printed glass

Super Supply

Super Supply – Why supply only orders offer more opportunities

Here at Opticolour as well as our measure and fit service we also offer a supply-only service. This is perfect for customers who are happy to provide us with measurements and install their own bespoke glass splashback and do not require us to do the measuring and fitting for them. We can send glass panels to addresses throughout the UK, and we always include our specialist silicone fixing adhesive, free of charge so you can install your panel immediately.

How it works
We require the measurements of your panels to the nearest millimetre. You will not need to produce a template if your panel is a straightforward rectangle or square, however if you require cut-outs or shaping (for example for plug sockets or to fit under a curved extractor hood) then we would ask you to send a template ideally made from MDF. If the MDF template fits then you can rest assured that your glass will also fit! Alternatively you can make drawings and email these to us instead.

How to measure

  • Sizes should be presented in millimetres with the width and height clearly marked. Please remember that once the glass has been toughened it cannot be trimmed or filed, so it is important to get the measurements right first time.
  • If you make templates they should always have straight edges, unless you have included an intentional curve or cut-outs to accommodate fixtures and fittings. The glass will always be cut straight, and will not be scribed (contoured) into uneven, crooked or irregular walls, worktops or floors.
  • First check all worktops or shower trays with a spirit level. If this base surface is level you can move on to the next step. If it is not level this needs to be taken into account – we can then cut the glass out of square in order to keep the sides vertical. (It is particularly wise to keep the sides of glass panels vertical wherever panels butt against one another.) To provide us with the measurements we need, draw a horizontal line a few centimetres above the base surface along the entire length of the base, using your spirit level to ensure the line is level. You can then measure the height difference between the base and the line at each end to determine how far out of square the height is. It is important to do this or your ends will not be vertical!
  • Next do the same vertically at the ends (sides) to find out if and by how much the sides are out of square. You can then measure between your lines and add on for any off-squareness.
  • Do not measure too tightly – always leave a tiny gap around the edges to allow the panels to be installed smoothly and as a margin for error. The industry standards for glass cutting are + or –2mm; Opticolour endeavours to achieve +0mm or –0.5mm, but there can be a variation of up to 1mm between different tape measures!
  • Bear in mind at all times – particularly when measuring around right-angled corners – that few walls are really flat. The glass will sit on the part of the wall that sticks out furthest. Allow at least 8mm for the thickness of the glass and adhesive where panels are fitted at a right angle to each other. Please ensure that cut-outs for sockets or any other fittings are at least 25mm from the edge of the glass, or each other, unless they butt right up against one another.
  • We can cut an upside down “T” shape to avoid joins.

Supply only inspiration
These customer install photos highlight whether you require a straightforward rectangle to sit in between wall units or a panel cut around an extractor, we cut our glass to suit your needs and provide a sleek and professional fit to suit all.

 

aN installation of our White glass done on behalf of Harvey Jones Notting Hill 

/cream-coloured-glass-splashback
An installation of Cream by a retail customer

 

/vertical-forest-green-stripes
An installation of Forest Green Stripe glass splashback.

 

/bespoke-wave-printed-glass-splashbacks
An installation of a printed glass splashback, shown here in SMO002.

 

We hope this helps give you the confidence if you are considering supply only orders. However if you need a little extra support, please do not hesitate to contact us, we are more than happy to guide you. Happy measuring!

Wall art splashbacks: bringing nature inside

House plants are having a major resurgence right now – and there are many ways in which we benefit from having them in our homes. Plants and flowers lower stress and create a relaxed ambience, ease tension and promote wellbeing, and enhance creativity and productivity. But what if your home receives little in the way of natural light, or you don’t have much space for plants or… you’re just not very good at looking after them? Installing glass splashbacks or panels printed with botanical images is one of the most effective wall art ideas for bringing the outside in.

Read more

Why trompe l’oeil glass panels are the new heroes of home decor

Choosing the right materials for your kitchen or bathroom is often a balancing act between beauty and practicality. It’s so often the case that the most attractive finishes are also the most problematic – marble can stain, exposed brick is dusty and porous, metal rusts and wallpaper is hard to clean and non-waterproof. Even tiling, that most traditional of kitchen wall finishes, requires grout that gets dirty, discoloured or mouldy. Sometimes, what initially seemed like a good home decor idea can turn into an expensive headache further down the line. Read more

Silhouette of London skyline printed glass kitchen splashback

Reach for the skyline

Digitally printed glass offers a multitude of options for kitchen wall decor, from personal pictures or drawings to professional landscape photography. Skyline art lends itself particularly well to kitchen panels, as its extended rectangular shape is ideal above the worktop area and can easily be modified to fit the space required. While it would certainly suit a modern kitchen, it could also work as a spectacular finish in a more traditional interior. Read more